Furnaces in Schertz work in short bursts and then sit idle for eight or nine months. That pattern makes maintenance more important here, not less.
Why tune-ups matter more in Schertz
- Dust settles all summer. It coats the flame sensor and burners, which causes the "lights, then shuts off" problem on the first cold day.
- Igniters crack when cold-started. A tune-up catches an igniter that's already weakened before it fails at night.
- Attic heat ages parts. Capacitors and wiring in attic furnaces degrade during summer and are tested during maintenance.
- Drains clog with algae. The AC runs all summer and the condensate line clogs, which can lock out a high-efficiency furnace or overflow into the ceiling.
- Safety. Carbon monoxide testing and a heat exchanger inspection are the most important parts of the visit for any gas furnace.
Our 18-point furnace tune-up
- Test for carbon monoxide at the furnace and in the home
- Inspect the heat exchanger for cracks, rust and soot
- Clean and test the flame sensor
- Inspect the hot surface igniter
- Check and adjust gas pressure
- Inspect and clean the burners, and check flame quality
- Test the inducer motor and pressure switch
- Test all safety limit switches
- Inspect the flue and venting for blockages and secure joints
- Clean the blower wheel if needed and check the motor amperage
- Test the blower capacitor
- Check the filter, and replace it if you provide one
- Flush the condensate drain and trap (high-efficiency units)
- Test the float switch and inspect the drain pan (attic units)
- Tighten electrical connections and inspect wiring
- Measure temperature rise across the furnace
- Calibrate and test the thermostat
- Run complete heating cycles and record the results
You get a written summary of what we found, with photos of anything that needs attention. If a part is worn but still working, we'll tell you so you can plan, not panic.
When to schedule
The best window in Schertz is September through early November, before the first real cold front. Once the first freeze hits, emergency calls fill the schedule and tune-up appointments get harder to find. If you missed the fall window, a tune-up in December or January is still worth it.
Heat pump systems benefit from twice-yearly service: once before summer (cooling) and once before winter (heating, including the heat strips).
Warranty note: many furnace manufacturers expect regular professional maintenance, and some warranty claims ask for proof. Keep your tune-up records. We provide a written report each visit.
What you can do between tune-ups
- Change the filter every 1–3 months, more often with pets or during mountain cedar season (about December to February). See the furnace filter guide.
- Keep the area around the furnace clear: no storage against a closet furnace and no boxes on attic platforms.
- Test CO alarms monthly and replace batteries yearly.
- Keep return vents unblocked by furniture and rugs.
Furnace tune-up cost in Schertz
| Item | Typical cost | Notes |
|---|---|---|
| Furnace tune-up | $80 – $200 | 18-point inspection and cleaning |
| Heat pump heating tune-up | $100 – $220 | Includes heat strip testing |
| Condensate drain flush | Included | Part of every tune-up |
| Annual maintenance plan | $150 – $300/yr | Typically two visits plus priority service |